• Support
• Overview
• Announcements
• Technical Support
• Login Here
• User Guide
• Technical Links
• Technical FAQ
• Partners

DVB receiver Installation and Configuration.

(Pent@Net / Pent@Vision)

General settings

• Make sure the computer is totally Turn-off before installing the DVB Receiver card.
• Install the DVB Receiver card on the available PCI slot of your computer and follow the instructions written on each DVB Receiver User's Manual. (Included in the box)
• Make sure that DVB Receiver adapter do not have any IRQ conflict with the other network adapter. Check Start, Settings, Control Panel, System and go to Device Manager and click the Network Adapter

Satellite Receiver Card Settings

1. Go to Start, Programs and PentaMedia
2. Then click Pent@NET Ver.X.XX
3. Then you have to click "SEEK" icon to enter the Tuner parameters
4. If the AsiaSat 3S is not yet set, create a new one by clicking the "new" button
   
5. Then click "add" to make it active.
6. Double click the "Asiasat 3S" and add the following setting for the Transponder as show in the pictures.
   
   
7. Make sure to add these PID's [301,302,303,304,305 and 350]
8. Then click OK to finish the settings.
9. Clicks "seek" to check if the setting that you input is correct.
10. You should see a green bar and the message that your satellite link ¡K. Locked.
11. Then you're done.

Back to User Guide listing.