• Support
• Overview
• Announcements
• Technical Support
• Login Here
• User Guide
• Technical Links
• Technical FAQ
• Partners

DVB receiver Installation and Configuration.

(Telemann SkyMedia-200D)

General settings

• Make sure the computer is totally Turn-off before installing the DVB Receiver card.
• Install the DVB Receiver card on the available PCI slot of your computer and follow the instructions written on each DVB Receiver User¡¦s Manual. (Included in the box)
• Make sure that DVB Receiver adapter do not have any IRQ conflict with the other network adapter. Check Start, Settings, Control Panel, System and go to Device Manager and click the Network Adapter

Satellite Receiver Card Settings

1. Go to Start, Programs and Telemann SkyMedia-200D
2. Then click SkyMedia-200D Data
3. Once executing the SkyMedia-200D data application, you will see SkyMedia-200D data icon at the right bottom side of window.
   
4. You can activate 'SkyMedia-200D Data Setup' by double clicking SkyMedia-200D data icon or by clicking the right mouse button on SkyMedia-200D Data icon and choosing 'SkyMedia-200D Data Setup'.
5. Set the same setting as show in this picture.
   
   
   
   
6. After you set all the right parameters for the alignment, then click the "Lock Test" you should able to see the TUNER, QPSK, VITERBI and FRAME are all okay


7. FEC (Forward Error Correction) shows the FEC mode of the current signal.
   
8. Now we can add the needed PID's by just moving the PID's coming from the "Available Data PID List" going to "Selected Data PID List".
   
9. Then click Apply and then click Okay and you are done.

Back to User Guide listing.